|
The I-7188XBD-CAN PAC (programmable automation controller) is powered of 80188-40 processor with 512K bytes SRAM, and 512K bytes of Flash memory. All of them provide several communication interfaces to adapt to various applications, such as CAN port, RS-232 port and RS-485 port. Users can program their application program flexibly with C/C++ language because of the built-in MiniOS7 operation system. Besides, the I-7188XBD-CAN PAC has different I/O types for users to match their requirement. For I-7188XBD-CAN it provides 1 open collector digital output channel and 1 digital input channel. It is useful for transfer the command from differential communication interface, and it has over voltage protection to avoid the damage of all other parts of I-7188XBD-CAN when the surge voltage comes from CAN bus. Therefore, it can satisfy the applications with I/O demand. Therefore, the I-7188XBD-CAN PAC is economic and convenient solution for diversification CAN application.
Features
- 2500Vrms photo-isolation protection.
- Compatible with CAN specification 2.0 parts A and B.
- Programmable transfer rate up to 1 Mbps.
- Jumper select 120£[ terminator resistor for CAN channel
- 64-bit hardware unique serial number inside
- COM driver support interrupt & 1K QUEUE input buffer
- COM port: COM1, COM2
- Built-in RTC, NVRAM, EEPROM
- One digital Input channel and one open collector output channel
- Built-in self-tuner ASIC controller on RS-485 port
- 7-segment LED display
- Built-in ICP DAS¡¦s MiniOS7
- Program download port: COM1
For more information, please refer to
http://www.icpdas.com/products/Remote_IO/can_bus/I-7188can.htm
|
|