|
Model:
- RS-232/RS-485 interface ==> I-8410, I-8810, I-8411, I-8811.
- Ethernet/RS-232 interface ==> I-8430, I-8830, I-8431, I-8831, I-8430-80, I-8830-80, I-8431-80, I-8831-80, I-8KE4, I-8KE8
Version Informaton:
This version adds new function to reverse the logical value of Digital Input Signal.
Normally the logical value of DI on I-8000 system is 1 => High( LED ON ); 0 => Low( LED OFF )
For some situation it need to reverse the DI signal for application.
The command ~AADO will set the DI state 1 => High( LED ON ); 0 => Low( LED OFF )
The command ~AAD1 will set the DI state 0 => High( LED ON ); 1 => Low( LED OFF )
Download url:
For RS-232/RS-485 interface :
ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/dcon/8410_8810/firmware/for_256k_sram/dcon/a3.05/
For Ethernet/RS-232 interface :
ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/dcon/8430_8830/firmware/for_512k_sram/a3.05/
File location at CD:
For RS-232/RS-485 interface :
CD:\Napdos\DCON\8410_8810\Firmware\for_256k_sram\DCON\A3.05\
For Ethernet/RS-232 interface :
CD:\Napdos\DCON\8430_8830\Firmware\for_512k_sram\A3.05\ |
|